Home / Dr. Mahmoud Bady

 
  • Dr. Mahmoud Bady

    Department: MECHANICAL ENGINEERING

    Office:E2332
    E-mail:mfbady@yahoo.com
    Phone:+966-54755-1973
    Fax:+966(14)845-6139
    Website:

  • Education

    • PhD in Mechanical Engineering, University of Tokyo, Japan (2008).
    • MSc in Mechanical Engineering, Assiut University, Egypt (2002).
    • BSc in Mechanical Engineering, Assiut University, Egypt (1996).
  • Research Interests

    • Internal Combustion Engines, Air Quality, Wind Energy
  • Teaching Interests

    • Undergraduate Level: Internal Combustion Engines, Thermodynamics, Heat Transfer, Numerical Methods, FORTRAN programming.
    • Graduate Level:  Sustainable Power Generation, Computational Fluid Dynamics, Renewable Energy, Environmental Engineering
  • Professional Experience

    1. Academic Positions
    • Assistant Professor, Mechanical Engineering Department, Islamic University in Madinah, Al-Madinah Al-Munawwarah, Saudi Arabia                                                                                    Nov. 2016- Present
    • Assistant Professor, Department of Energy Resources Engineering, Egypt-Japan University of Science and Technology (E-JUST), Egypt                                                                                                     2011- 2016
    • Assistant Professor, Department of Mechanical Engineering, Assiut University, Egypt          2008- 2011
    • Research Assistant, Institute of Industrial Science, University of Tokyo, Japan                       2004-2008
    • Lecturer, Department of Mechanical Engineering, Assiut University, Egypt                            2002-2004
    • Demonstrator, Department of Mechanical Engineering, Assiut University, Egypt                   1996-2002

     

    1. Administrative Positions
    • Air Quality Lab Manager, Egypt-Japan University of Science and technology (E-JUST), Egypt; 2013-2016.

     

    1. University Services
    • Member of the Curriculum Committee, Faculty of Engineering, Islamic University in Madinah, Al-Madinah Al-Munawwarah, Saudi Arabia, March 2017- Present.
    • Member of the Examination and Time Schedule Committee, Faculty of Engineering, Islamic University in Madinah, Al-Madinah Al-Munawwarah, Saudi Arabia, December 2016- Present.
    • Member, Faculty Performance Evaluation Committee, Mechanical Engineering Department, Assiut University, Assiut, Egypt, 2002-2004.
  • Research Projects

    • MED-TEST II: Industrial Energy Efficiency and Energy Management System (A funded project from UNIDO). Project duration is from June 2015 to May 2017.
    • Solar-Driven Adsorption Cooling for Residential Air-Conditioning: System Evaluation and Comparison to Conventional Chillers (A joint research project between Assiut University and Fraunhofer Institute for Environmental, Safety and Energy Technology (Germany).
    • Inverse CFD modeling as a Promising Tool to Identify Pollution Sources in Urban Areas (A collaboration project between the University of Tokyo and the Japanese government).
    • Optimum Design of a High-Density Populated Areas from the Air Quality Point of View (A collaboration project between the University of Tokyo and the Japanese government).
  • Awards and Honors

    • Research Fund of "Japan Society for the Promotion of Science (JSPS)," "Ki Ban A Ka Ken Hi," JSPS, 2008.
    • COE program fund "Continuous Regeneration of Urban Space Creation Science" of University of Tokyo to encourage young researchers, 2007.
    • Undergraduate “Distinction Award,” Faculty of Engineering, Assiut University, Assiut, Egypt, years 1994 and 1995.
  • Selected Publications

    Academic Journals

    • Ghada E., Negm A., Bady M., Suzuki M. and Mona G. “Numerical and Experimental Investigations of the Impacts of Window Parameters on Indoor Natural Ventilation in a Residential Building.” Energy and Building, Vol. 141, (2017).

     

     

     

     

    • Abdeen A., Bady M., Ookawara S., and Ali. K. Abdelrahman, “Achieving Standard Natural Ventilation Rate of Dwellings in a Hot-arid Climate Using Solar Chimney.” Energy and Buildings, Vol. 133, December (2016).    

     

    • Abdel Monteleb A., Negm A., Bady M., Mona G. and Suzuki M., “Environmental Impact Assessment of the Egyptian Cement Industry based on a Life-Cycle Assessment Approach: a Comparative Study between Egyptian and Swiss Plants.” Clean Technology and Environmental Policy, Vol. 18(4), April (2016).

     

    • Bady M., “Application of Age of Air of Indoor Environments as a Promising index to evaluate the Outdoor Air Quality Using CFD Simulations.” Journal of Engineering Sciences, Assiut University, Vol. 44 (3), May (2016).

     

    • Mostafa S., Ali K. Abdel-Rahman, Bady M., Essam M., and Suzuki M., “Optimum Energy Consumption by using Kinetic Shading System for Residential Buildings in Hot Arid Areas.” International Journal of Smart Grid and Clean Energy, Vol. 5(2), (2016).
    • Bady M., and Hassanein M., “Investigation of the Effects of Condenser Descaling on the Exhaust Emissions and the Performance of Thermal Power Plants.” Journal of Engineering Sciences, Assiut University, Vol. 44 (2), March (2016).

     

    • Waled D., Negm A., Saleh N., and Bady M., “Impact Assessment of Offshore Pile Driving Noise on Red Sea Marine Mammals,” International Journal of Environmental Science and Development, 7(1), January (2016).

     

    • Elkafoury A., Negm A., Bady M., and Hafez M. “Modeling Vehicular CO Emissions for Time Headway-based Environmental Traffic Management System.” Procedia Technology, 19, (2015).

     

    • Bady, M., “Towards Sustainable Power Generation Using Solar Chimney“. Open Access Library Journal, Vol. 2, pp.1-9, (2015).

     

    • Abdel Monteleb A., Negm A., Bady M., and Mona G. “Environmental Life Cycle Assessment of a Residential Building in Egypt: A Case Study.” Procedia Technology 19, (2015).

     

    • Elkafoury A., Negm A., Hafez M., Bady M., and Ichimura T.,”Develop Dynamic Model for Predicting Traffic CO Emissions in Urban Areas.” Environmental Science and Pollution Research, Accepted, DOI: 10.1007/s11356-015-4319-8, (2015).

     

    • Elkafoury A., Negm A., Hafez M., Bady M., and Ichimura T.,”Operational and Environmental Evaluation of Traffic Movement on Urban Streets using GPS Floating-Car Data.” International Journal of Engineering & Technology 4(1), (2014).

     

    • Bady M., “Analysis of Outdoor Human Thermal Comfort within Three Major Cities in Egypt.” Open Access Library Journal, Vol.1, pp. 1-11, (2014).

     

    • Elkafoury A., Waled D., Negm A., Bady M. and Aly M., “Framework for Evaluating the Impact of Urban Transportation Gaseous Emissions on Groundwater Quality.” International Water Technology Journal 4(2), (2014).

     

    • Abdel Monteleb A., Negm A., Bady M., and Mona G. “Moving Towards an Egyptian National Life Cycle Inventory Database.” The International Journal of Life Cycle Assessment 19(8), (2014).

     

    • Abdel Monteleb A., Negm A., Bady M., and Mona G. “Towards an Integrated Tool to Estimate Carbon Emissions from Life Cycle Assessment of Building Materials in Egypt,” IMPACT: International Journal of Research in Engineering and Technology 2(3), (2014).

     

    • El-Gamal H., El-Azab M., Abdel Mageed A., Bady M., Hasabelnaby M. and Hassanien M. “Monstrous Hazards Produced by High Radioactivity Levels around Assiut Thermal Power Plant.” American Journal of Environmental Sciences 9(5), (2013).

     

    • Bady M., “Assessment of Urban Air Quality in Assiut city-Egypt based on Full-Scale Measurements of Air Pollutants.” Journal of Engineering Sciences, Assiut University 41(3), (2013).

     

    • Bady M., Hassanein M., Adel M. Kamal and Hussein A. “Study of the effects of using Acetic Acid in Condenser descaling on the Exhaust Emissions and the Performance of Assiut Thermal Power Plant.” Journal of Engineering Sciences, Assiut University 41(3), (2013).

     

    • Bady M. “Fundamentals of Direct Inverse CFD Modeling to Detect Air Pollution Sources in Urban Areas.“ Computational Water, Energy, and Environmental Engineering 2(2), (2013).

     

    • Bady M., “Assessment of Wind Conditions in Assiut City, Egypt using Long Term Wind Measurements,” Journal of Engineering Sciences, Assiut University 40 (6), (2012).

     

     

    • Bady M., Hassanein M., Adel M. Kamal and Hussein A. “Study of Waste Water Treatment means in Assiut Thermal Power Plant” Journal of Engineering Sciences, Assiut University 40(4), (2012).

     

    • Bady M., Kato S., Ishida Y., Huang H, and Takahashi T., “Application of Exceedance Probability based on Wind Kinetic Energy to Evaluate the Pedestrian Level Wind in Dense Urban Areas.” Building and Environment 46(9), (2011).

     

    • Bady M., Hassanein M., Adel M. Kamal and Hussein A. “Study of Solid Waste and Ashes Content of Radioactive and Heavy Metals in Assiut Thermal Power Plant”. Journal of Engineering Sciences (Assiut University) 39(6), (2011).

     

    • Bady M., Hassanein M., Adel M. Kamal and Hussein A. “Study of the Effects of Furnace Cleaning on the Performance and Emissions of Assiut Power Plant". Egyptian Sugar Journal (Assiut University) 4, (2011).

     

    • Bady M., Kato S., Takahashi T., and Huang H., “An Experimental Investigation of the Wind Environment and Air Quality within a Densely Populated Urban Street Canyon”. Journal of Wind Engineering and Industrial Aerodynamics 99(8), (2011).

     

    • Bady M., Kato S., Takahashi T., and Huang H., “Experimental Investigations of the Indoor Natural Ventilation for Different Building Configurations and Incidences". Building and Environment 46(1), (2011).

     

    • Bady M., Kato S., Ishida Y., and Huang H., “Identification of Pollution Sources in Urban Areas Using Reverse Simulation and Reversed Time Marching Method.” Journal of Asian Architecture and Building Engineering 8(1), (2009).

     

    • Bady M., Kato S., and Huang H, “Towards the Application of Indoor Ventilation Efficiency Indices in Evaluating the Air Quality of Urban Areas.” Building and Environment 43(12), (2008).

     

    • Bady M., Kato S., Ishida Y., Huang H, and Takahashi T., “Exceedance Probability as a Tool to Evaluate the Wind Environment within Densely Urban Areas.” Wind and Structures 11(6), (2008).

     

    • Bady M., Kato S., Ishida Y., Huang H, and Takahashi T., “Study on Wind Environment in Urban Blocks by CFD, Part II: Application of Exceedance Probability in Evaluating the Wind Environment within Densely Urban Areas in Japan.” Journal of Architecture Planning and Environmental Engineering 73(634), (2008).

     

    • Bady M., Kato S., Ishida Y., Huang H., and Takahashi T., “Assessment of Wind Ventilation Performance inside a Street Located Within a Densely Urban Area Using Exceedance Probability Criterion.” Journal of Institute of Industrial Science (University of Tokyo), 60(1), (2008).

     

    • Bady M., Kato S., and Huang H., “Analysis of Ventilation Efficiency Indices inside a Local Domain in an Urban Area Using Two Building Model, Part (II): Effect of Wind Direction.” Journal of Institute of Industrial Science (University of Tokyo), 59(3), (2007).

     

    • Bady M., Kato S., and Huang H., “Analysis of Ventilation Efficiency Indices inside a Local Domain in an Urban Area Using Two Building Model, Part (I): Effect of Void Width and Building Height.“ Journal of Institute of Industrial Science (University of Tokyo), 58(1), (2006).

    Conference Proceedings

    • Meshack H., Ali K. Abdelrahman, Bady M. and Ookawara S., “Prediction of Diesel Combustion and Emission Characteristics in CI Engine using Computational Fluid Dynamics Simulations." Proceedings of the Power Energy Conference (ICOPE17), USA, June (2017).

     

    • Abdeen A., Bady M., Ookawara S., and Ali. K. Abdelrahman, “Solar Chimney Design for Standard Ventilation Rate of Residential Buildings in Hot-arid Climate.” The 9th International Conference on Indoor Air Quality Ventilation & Energy Conservation In Buildings (IAQVEC 2016), Incheon Songdo, South Korea, October (2016).

     

    • Mohamed Noureldin, H. Kosaka, Ali K. Abdel-Rahman, and Bady M., "Effect of Water Injection into Exhaust Manifold on Diesel Engine Combustion and Emissions.” The 3rd International Conference on Power and Energy Systems Engineering (CPESE 2016), Kitakyushu, Japan, September (2016).

     

    • Ahmed EL-Seesy, Ali K. Abdelrahman, Bady M. and Ookawara S., “The Influence of Multi-Walled Carbon Nanotubes Additives into Non-Edible Biodiesel-Diesel Fuel Blend on Diesel Engine Performance and Emissions.” The 3rd International Conference on Power and Energy Systems Engineering (CPESE 2016), Kitakyushu, Japan, September (2016).

     

    • Ahmed EL-Seesy, Ali K. Abdelrahman, Bady M. and Ookawara S., “Investigation of Exhaust Emissions and the Performance of a Diesel Engine Fueled by Jojoba Methyl Ester-Diesel Mixture with Addition of Nanoparticles.” The 15th International Conference on Sustainable Energy Technologies (SET 2016), Singapore, July (2016).

     

    • Radwan A., Mahmoud A., Bady M., and Ookawara S., “Investigation of Manifold Micro-Channel Cooling of Concentrated Photovoltaic System.” The 2nd International Conference on Advances in Mechanical Engineering, Istanbul, Turkey, May (2016).

     

    • Waled D., Kasama K., Saleh M., Negm A. and Bady M., “Geo-Spatial Tool for the Assessment Offshore Pile Driving Noise Effects on Marine Mammals.” Proceedings of the International Conference of Engineering Sciences and Applications, Aswan, Egypt, January (2016).

     

    • Ghada E., Negm A., Mona G., and Bady M., “Towards a Green Building: a Preliminary Study of Natural Ventilation on Thermal Comfort and its Impact on Residential Building in the City of New Borg El Arab.” Proceedings of the International Conference of Engineering Sciences and Applications, Aswan, Egypt, January (2016).

     

    • Elkafoury A., Negm A., Bady M., and Hafez M., “Develop Trip Generation Model for Alexandria City, Egypt.” Proceedings of the 6th European Conference of Civil Engineering, Budapest, Hungary, December (2015).

     

    • Elkafoury A., Negm A., Bady M., and Hafez M., “VISSIM Based Microscopic Traffic Emission Prediction Model.” Proceedings of the 8th International Conference on Urban Planning and Transportation (UPT '15), Spain, January (2015).

     

    • Nour M. Abdel Rahman A. K. Bady M., and Ookawara S., “Experimental Investigation of Performance and Exhaust Emissions of a Gas Turbine Engine Fuelled with Waste Cooking Oil.” The 18th IFRF Members’ Conference – Flexible and Clean Fuel Conversion to Industry Freising, Germany, June (2015).

     

    • AbdelMonteleb A., Negm A., Bady M., and Mona G. Ibrahim, "Assessing the Environmental Impacts of the 3-D Panel System as a New Material in the Construction Industry using LCA".  The 10th International Conference on Role of Engineering towards a Better Environment (RETBE), Alexandria, Egypt, December (2014).

     

    • Elkafoury A., Negm A., Bady M., and Mohamed H. Aly, “Relation between Vehicles Time Headway and Carbon Monoxide Emissions from Traffic in Urban Areas: Case Study: New Borg El-Arab City – Egypt.” International Conference on Integrated Management of Environment, Tunisia, September (2014).

     

    • AbdelMonteleb A., Negm A., Bady M., and Mona Gamal El-Din Ibrahim, “Framework for Application of Life Cycle Assessment Approach on Egyptian Residential Building, Case Study: New Assiut City, Egypt.” International Conference on Integrated Management of Environment, September (2014), Tunisia.

     

    • AbdelMonteleb A., Negm A., Bady M., and Mona Gamal El-Din Ibrahim, “Effect of Fuel Type on the Life Cycle of Egyptian Cement Industry: Environmental Impact Assessment Approach.” The Asian Conference on Sustainability, Energy and the Environment (ACSEE 2014), June (2014), Japan.

     

    • Elkafoury A., Negm A., Bady M. and Aly M., “Review of Transport Emission Modelling and Monitoring in Urban Areas-Challenge for Developing Countries.” The 3rd International Conference on Advanced Logistics and Transport (ICALT), Hammamet, Tunisia, May (2014).

     

    • Abdel-Montaleb A., Negm A., and Bady M., “Monitoring Energy Consumption in Life Cycle Assessment of Cement Industry.” Towards 100% Renewable and Sustainable Communities for Africa, Cairo, April (2014).

     

    • Abdel-Montaleb A., Negm A., and Bady M., “Estimating Carbon Emissions from Industrial ‎Processes by using Life Cycle Assessment Tool” . The 1st International Conference on Industry-Academia Collaboration (IAC2014), Cairo, Egypt, March (2014).

     

    • Waled D., Negm A., Bady M., and Saleh N., “Environmental Impact Assessment of Abundant Lead Landfall on Groundwater and Soil Quality.” The 17th International Water Technology Conference (IWTC17), Istanbul, Turkey, November (2013).

     

    • Elkafoury A., Waled D., Negm A., Bady M. and Aly M., “Framework for Evaluating the Impact of Urban Transportation Gaseous Emissions on Groundwater Quality.” The 17th International Water Technology Conference (IWTC17), Istanbul, Turkey, November (2013).

     

    • El-Kafoury A., Bady M., Mohamed H. and Negm A., “Emissions Modeling for Road Transportation in Urban Areas: A Literature Review.” The 23rd International Conference in “Environmental Protection is a Must,” Alexandria, Egypt, May (2013).

     

    • Bady M., “Towards Sustainable Power Generation Using Solar Chimney.” The 7th Annual Conference of the Center Of Futuristic Studies, Assiut University, Egypt, February (2013).

     

    • Ashraf M., Ahmed H. Ali, Yehia El-Mahgary, Ookawara S., and Bady M., “Estimation of Wind Energy Potential for Small-Scale Wind Concentrator Turbines Using CFD Simulations; Part (1): Effect of Concentrator Shape”. The 2012 International Conference on Advances in Wind and Structures (AWAS12), Seoul, Korea, August, (2012).

     

    • Bady M., “Detection of Air Pollution Sources in Urban Areas using Gaussian Plume Model.” The 6th International Conference on Development and the Environment in the Arab World, Assiut, Egypt, March (2012).

     

    • Ali M., M. El-Haddad, and Bady M. “Study of Air Quality in Assiut City based on Full-Scale Measurements.” The 3rd Scientific Conference for Young Researchers, Assiut University, Assiut, Egypt, April (2011).

     

    • Bady M., Kato S., and Huang H., “Application of Inverse CFD Modeling to Identify Pollution Source Locations in Urban Areas”. The Annual Meeting of the Japanese Architecture Association (AIJ), Hiroshima, September (2008).

     

    • Bady M., Kato S., Huang H., “Application of Inverse CFD Modeling to Identify Pollution Source Locations in Urban Areas.” The 8th UK Conference on Wind Engineering (WES08), Guildford, England, July (2008).

     

    • Bady M., Kato S., Huang H., “Inverse CFD Modeling as a Tool to Identify Pollution Source Locations in Outdoor Environments: Application of Reversed Time Marching Method.” Egypt-Japan International Conference on Science and Technology (EJICST2008), Tokyo, Japan, June (2008).

     

    • Bady M., Kato S., Huang H., “Identification of Pollution Sources Locations in Outdoor Environments Using Reversed Time Marching Method.” The 3rd International Symposium on Wind Effects on Buildings and Urban Environment (ISWE3): New Frontiers in Wind Engineering, Tokyo, Japan, March (2008).

     

    • Bady M., Kato S., Takahashi T., and Huang H., “Wind Tunnel Experiments of Wind Pressure Distribution on Buildings along a Street of a High-Density Built-up Area.” The Annual Meeting of the Japanese Architecture Association (AIJ), Fukuoka, September (2007).

     

    • Bady M., Kato S., Ishida Y., and Huang H., “Assessment of Wind Environment inside an Urban Domain using Exceedance Probability based on Air Exchange Rate and Wind Kinetic Energy". The 2nd Asian Symposium on Urban Environment and Energy, China, November (2007).

     

    • Bady M., Kato S., Takahashi T., and Huang H. “Wind Tunnel Tests of Wind Pressures on Cubic Buildings inside a Street of a High-Density Built-up Area". The 12th International Conference on Computational Wind Engineering (12ICWE), Cairns, Australia, July (2007).

     

    • Bady M., Kato S., Takahashi T., Ishida Y., and Huang H., “A Study of Urban Ventilation in High-Density Built-up Area through Wind Tunnel Experiments and CFD Simulations”. Poster session of the Institute of Industrial Science Exhibition (Collaboration between Industries and Universities Forum), University of Tokyo, January (2007).

     

    • Bady M., Kato S., Takahashi T., Huang H. and Ooka R. “Study of the Effect of Wind Direction on PFR inside an Urban Street Canyon through CFD Simulation and Wind Tunnel Experiments” . The Annual Meeting of the Japanese Architecture Association (AIJ), Yokohama, September (2006).

     

    • Bady M., Kato S., Takahashi T., Huang H. “Study on Wind Environment in Urban Blocks by CFD Part (5): Wind Tunnel Experiments on Urban Ventilation in 3-D Densely Built-up Area". The Annual Meeting of the Japanese Society of Heating, Air-Conditioning and Sanitary Engineers (SHASE), Nagano, September (2006).

     

    • Bady M., Kato S., Takahashi T., and Huang H., “Study on Wind Environment in Urban Blocks by CFD: Wind Tunnel Experiments on Urban Ventilation in 3-D Densely Built-up Area". The 1st Asian Symposium on Urban Environment and Energy, Tokyo, Japan, August (2006).

     

    • Bady M., Kato S., and Huang H., “Analysis of Ventilation Efficiency Indices inside a Local Domain within an Urban Area Using Two Building Model". The 4th International Conference on Computational Wind Engineering (CWE), Yokohama, Japan, July (2006).

     

    • Bady M., Kato S., Takahashi T., Huang H., and Ooka R., “Study of the Effects of Ambient Wind Direction on Flow Characteristics and Purging Flow Rate Inside a Domain Located within an Urban Street Canyon”. The 6th International Conference on Urban Climate (ICUC6), Sweden, June (2006).

     

    • Bady M., Kato S., Ooka R., Huang H., and Jiang T., “Comparative Study of Concentrations and Distributions of CO and NO in an Urban Area: Gaussian Plume Model and CFD Analysis”. The 14th International Conference on Modeling, Monitoring, and Management of Air Pollution, Southampton, England, May (2006).

     

     

    Books and Book Chapters

    • “Wind Tunnels: Design/Construction, Types and Usage Limitations” ISBN 978-1-62618-396-4, Nova Publisher (2013).
    • "Ventilating Cities" ISBN 978-94-007-2770-0, Springer Publisher (2012).
    • "Air Quality" ISBN 978-953-307-131-2, Sciyo Academic Publisher (2010).
  • Thesis Supervision

    Name

    Title

    Year

    Institute

    Status

    Hassanein Manaee Hassanein

    Control of the Emissions of Thermal Power Plants

    2012-2015

    Assiut University

    Finished his PhD on 2015

    Mohamed Hafez Ali

    Modeling of SO2 Dispersion from Assiut Thermal Power Plant

    2013-2015

    Assiut University

    Finished his MSc on 2015

    Ahmed Mohamed El-Kafoury

    Environmental Impact Assessment of  Transportation in Urban Areas

    2012-2015

    Egypt-Japan University of Science and Technology

    Finished his PhD on 2015

    Walid Ahmed Dawoud

    Geotechnical and Environmental Investigation for Optimal Design of Offshore Pile

    2012-2015

    Egypt-Japan University of Science and Technology

    Finished his PhD on 2015

    Ahmed Abdel-Monteleb Ali

    Estimating Carbon Emission in Building Life Cycle Assessment in Egypt

    2013-2016

    Egypt-Japan University of Science and Technology

    Finished his PhD on 2016

    Mostafa Mohamed Sayed

    Automatic Control of Window Ventilation in Residential Buildings

    2014-2016

    Egypt-Japan University of Science and Technology

    Finished his PhD on 2016

    Mohamed Nour El-Din Ibrahim

    Diesel Combustion Control Using Ethanol and Water Injection into Exhaust Manifold

    2014 –present

    Egypt-Japan University of Science and Technology

    PhD student (Still Running)

    Ahmed Ibrahim El-Sisi

    Combustion of Bio-Fuels with Nano-tubes

    2015-present

    Egypt-Japan University of Science and Technology

    PhD student (Still Running)

    Ahmed Abdeen Saleem

    Ventilation and Energy Conservation In Buildings

    2015-present

    Egypt-Japan University of Science and Technology

    PhD student (Still Running)

    Ghada El-Shafei

    Indoor natural ventilation in Residential Buildings

    2015-present

    Egypt-Japan University of Science and Technology

    PhD student (Still Running)

    Meshack Ochieng

    Combustion Kinetics of Bio-Diesel Fuel

    2016- present

    Egypt-Japan University of Science and Technology

    MSc student (Still Running)

  • Courses Taught

    At the Undergraduate level, Islamic University of Medina, Saudi Arabia

    • Differential Equations (MATH 204), Spring Semester 2016-2017
    • Heat Transfer (ME 346), Spring Semester 2016-2017
    • Power Plant and Desalination (ME 472), Spring Semester 2016-2017

    At the Undergraduate level, Assiut University, Egypt

    • Internal Combustion Engines, Fall 1998, Fall 1999, Fall 2000, Fall 2001, Fall 2002
    • Thermodynamics (II), Fall 1999, Fall 2000
    • Engineering Drawing, Spring 1998, Spring 1999, Spring 2000
    • Fluid Mechanics, Fall 1999, Fall 2000
    • Principles of Environmental Engineering, Fall 2009, Fall 2010, Fall 2011
    • Engineering Analysis, Fall 2009, Fall 2010, Fall 2011
    • Hydraulic Systems, Fall 2009, Fall 2010, Fall 2011

    At the Graduate level, Egypt-Japan University of Science and Technology, Alexandria, Egypt

    • Principles of Environmental Engineering, Spring 2012, Spring 2013
    • Air Quality and Control, Spring 2012, Spring 2013
    • Computational Fluid Dynamics (CFD), Fall 2011, Fall 2012, Fall 2013
    • Sustainable Power Generation (SPG), Spring 2011, Spring 2012, Spring 2013
    • Solar Energy, Fall 2014, Fall 2015
    • Renewable Energy, Spring 2014, Spring 2015, Spring 2016
  • Affiliations

    • Member of the Architecture Institute of Japan (AIJ)
    • Member of the Japanese Society of Heating, Air-Conditioning and Sanitary Engineers (SHASE).
    • Member of the Consultancy Office of the Faculty of Engineering, Assiut University, Assiut, Egypt.
    • Member of Industrial Technology Transfer Unit (ITTU), Assiut University, Assiut, Egypt.
    • Member of the Egyptian Engineering Syndicate.